elektronische bauelemente smf102fl ~ smf107fl voltage 100v~ 1000v 1.0 amp surface mount fast recovery rectifiers 09-may-2011 rev. a page 1 of 3 http://www.secosgmbh.com/ any changes of specification will not be informed individually. rohs compliant product a suffix of ?-c? specifies halogen & lead-free features ? glass passivated device ? ideal for surface mounted applications ? low leakage current ? metallurgically bonded construction ? high temperature soldering: 260 c /10 seconds at terminals mechanical data ? case: jedec sod-123fl, molded plastic over passivated chip ? terminals: solder plated, solderable per mil-std-750, method 2026 ? polarity: color band denotes cathode end ? weight: 0.0008 ounces, 0.022 gram ? mounting position: any marking product marking code product marking code smf102fl rb smf105fl rj SMF103FL rd smf106fl rk smf104fl rg smf107fl rm package information package mpq leader size sod-123fl 2.5k 7? inch sod-123fl e f b c d a g millimeter millimeter ref. min. max. ref. min. max. a 2.70 2.90 e 0.10 0.30 b 1.80 2.00 f 0.80 1.20 c 1.55 1.25 g 0.35 0.85 d 3.50 3.90
elektronische bauelemente smf102fl ~ smf107fl voltage 100v~ 1000v 1.0 amp surface mount fast recovery rectifiers 09-may-2011 rev. a page 2 of 3 http://www.secosgmbh.com/ any changes of specification will not be informed individually. maximum ratings and electrical characteristics (rating 25 c ambient temperature unless otherwise specified. single phase, half wave, 60hz, resistive or inductive load. for capacitive load, de-rate current by 20% .) part number parameters symbol smf 102fl smf 103fl smf 104fl smf 105fl smf 106fl smf 107fl unit recurrent reverse voltage (max.) v rrm 100 200 400 600 800 1000 v rms voltage (max.) v rms 70 140 280 420 560 700 v dc blocking voltage (max.) v dc 100 200 400 600 800 1000 v maximum average forward rectified current @t a = 65 c 1 i (av) 1.0 a peak forward surge current 8.3ms single half sine-wave superimposed on rated load tl=25 c i fsm 20 a typical thermal resistance junction to ambient 2 r ja 180 k / w typical thermal resistance junction to lead 4 r jc 40 k / w maximum reverse recovery time 3 t rr 150 250 500 ns operating temperature range t j -55~150 c storage temperature range t stg -55~150 c notes 1. averaged over any 20 ms period. 2. thermal resistance junction to ambient, 6.0 mm 2 copper pads to each terminal. 3. measured with i f =0.5a, i r =1a, i rr =0.25a. 4. thermal resistance junction to case. electrical characteristics parameters symbol min. typ. max. units testing conditions maximum instantaneous 5 v f - - 1.3 v forward voltage @ 1.0a maximum dc reverse current i r - - 10 a ta=25 c at rated dc blocking voltage i r - - 50 a ta=125 c typical junction capacitance 6 c j - 4 - pf notes 5. pulse test:300 s pulse width,1% duty cycle. 6. measured at 1.0mhz and applied average voltage of 4.0v dc.
elektronische bauelemente smf102fl ~ smf107fl voltage 100v~ 1000v 1.0 amp surface mount fast recovery rectifiers 09-may-2011 rev. a page 3 of 3 http://www.secosgmbh.com/ any changes of specification will not be informed individually. ratings and characteristic curves (smf102fl~smf107fl)
|
